斗式提升機的維護技巧你學會了嗎（中英文版）

When we buy a bucket elevator to go back, in addition to ask him to our work, but also give it a regular maintenance, as the saying goes, there is a harvest, as long as we treat our hoist equipment, it will provide us a good job. It gives us the manufacturing value is greater. On the lack of experience of machine maintenance is a very important regular work, it should be with extremely the operation and maintenance of close cooperation, so there should be a personnel on duty to check. A machine maintenance:

In 1, the bearing load bearing hoist machine full load, so the good lubrication on bearing life have a great relationship, it directly affects the service life of the machine and the running rate, thus requiring into the lubricating oil must be clean, seal must be in good condition, the main oiling machine at.

In 2, the newly installed tire easily loosened must always check.

3, pay attention to whether or not the work of machine parts.

4, pay attention to check the wear parts wear degree, always pay attention to replace the worn parts.

5, deregulating the device frame plane, should go out dust and dirt to avoid machine doesn't broken material activities bearing can not on the chassis of mobile, so that a serious accident.

6, bearing temperature, stop and check the reason to be eliminated.

In 7, the rotary gear in operation if the impact of noise check should be immediately stopped, and the elimination of.

Installation and test run of two:

In 1, the device should be installed in horizontal concrete foundation, fixed with anchor bolts.

In 2, the installation should pay attention to the main body and the horizontal and vertical.

3, check after installation of the bolts looseness and host doors are secured, please fasten.

In 4, according to equipment power distribution power line and a control switch.

5, check, for no load test, the test can be produced in normal.